Why Your Swim Spa Cover Stinks!

Hey, no offense, but your Swim Spa Cover smells bad. Possibly you’ve gotten used to it?
Don’t worry, it occurs to all spa owners at some time or another; water is among nature’s most erosive compounds. Moisture leaks in and ends up being trapped in between the outer vinyl shell and the plastic wrapped foam cores. The warm, wet environment is perfect for mold and mildew and other forms of foul-smelling things.
If moisture has actually permeated further into the cling wrap foam core, the cover becomes waterlogged, which can rapidly grow all sorts of dark and foul-smelling slime, but also make the cover truly hard to eliminate, and not as reliable at keeping the heat in the spa. Time for a much better type of Swim Spa Cover

Stinky Swim Spa Cover?!?
• Broken or harmed. Broken foam cores, ripped or used areas, torn seams. A Swim Spa Cover that loses it’s arched roofing line, to keep water draining off properly, will ultimately begin to puddle water, which is most likely time to purchase a new Swim Spa Cover! A Swim Spa Cover with threadbare spots in the vinyl is also problem, and although you can ward off the inescapable with a duct tape repair work, the water will win, eventually.
• Not Removed Regularly. Remove your Swim Spa Cover weekly for 2 hours of airing out. A much better Swim Spa Cover can hold up against longer periods, however it’s an excellent routine to get rid of the cover and let it get some air on a weekly basis. If you can easily open the zipper to permit moisture to escape do so, however do not eliminate delicate foam panels unless absolutely required.

Actually, this is just hogwash The problem is the foam itself. It would be great if it were put into use in a totally dry setting. Unfortunately, swim spas by their very nature are filled with warm water. Warm water creates steam and steam rises up and gets into the cracks and crevises in the foam until it gets so heavy you can’t lift it anymore. The only way to avoid it is to never put it on the swim spa.
• Poorly Made. It’s easy to make a Swim Spa Cover with tape and staples, however it will not stop moisture very well. Even the very best foam filled Lightweight Swim Spa Covers with vacuum-wrapped and heat bonded joint are not going to keep the intense wetness from your spa from reaching the foam core. The only genuine service is a Swim Spa Cover uses air to insulate rather than foam.
• Bad Spa Water. If the spa water is not preserved frequently with sanitizer and filtering, or is not surprised typically enough, bacteria and algae can benefit from a hospitable environment to grow. Low pH, high chlorine or high ozone levels can likewise weaken the underside of your Swim Spa Cover cover. Since the cover is so near the spa, it soaks up the chemistry of the spa. Tidy, clear and sanitary water is the best environment to prevent smelly spa covers. (Sorry but this is simply BS) The truth is the areas in the foam are nearly laboratory conditions for growing mold and mildew. Your spa chemistry is not going to stop that.
• Not Cleaned/ Conditioned. For outdoor Lightweight Swim Spa Covers, unless your back deck is covered or your spa is in a gazebo, you have sun, rain, pollen, dust, contamination, and animals to contend with. If you have a partial roof, that can be even worse than no roofing system at all, if an overhanging eave drains water onto the Swim Spa Cover Clean and condition a spa cover 2-4 times per year, so that it always looks terrific, and is protected from the elements. Once again, this really isn’t really going to stop the mold and mildew from growing inside a foam cover But it will assist your spa dealer pay their bills. If this were actually true a Swim Spa Cover inside would never get smelly and that just isn’t true.

Your Choices

Fix Your Swim Spa Cover!
• Remove to Safe Location: This initial step might seem obvious, however you require a great location to allow the cover to sit undisturbed from animals, wild animals, and winds. It should be a bright area if possible, or a dry indoor place with low humidity can likewise be used.
• Deodorize & Disinfect: You might not need to do both, it’s best to be as gentle as possible. Don’t use home cleaning products on your Swim Spa Cover, strange chemicals can wind up in your spa water. Carefully clean all outside surfaces with spa cover cleaner, and allow the panels to dry.
• Remove the Panels: Again, this need to be prevented if possible, due to the fact that the panels could become damaged throughout elimination or cleaning. However if you identify that there is something slimy inside, you can typically unzip and remove the panel for a cleaning inside and out.

How typically does your spa dealership expect you to do all this? If your swim spa is secured from most sun and rain, two times annually. If it’s visible it should be 3-4 times each year. Let that sink in a minute. Getting the foam panels in and out of the cover (something that was never designed to be done after it was initially constructed) will just cause it to rip apart or breakdown even faster. 

Much better Choice
The simplest treatment for a foul-smelling Swim Spa Cover is to just buy a various sort of Swim Spa Cover A stinky swim spa cover merely indicates that your cover is taking on wetness, and things are beginning to grow! Lightweight Swim Spa Covers from SpaCap.com that doesn’t use foam but has actually sealed air chambers rather will prevent providing the mold and mildew a place to grow in the first place.

Leave a Reply

Your email address will not be published. Required fields are marked *