Hey, no offense, but your Swim Spa Cover smells bad. Maybe you’ve gotten used to it?
Don’t worry, it takes place to all spa owners at one time or another; water is one of nature’s most erosive substances. Moisture seeps in and becomes trapped between the external vinyl shell and the plastic wrapped foam cores. The warm, damp environment is best for mold and mildew and other types of smelly stuff.
If wetness has actually penetrated even more into the plastic wrapped foam core, the cover becomes waterlogged, which can quickly grow all sorts of dark and smelly slime, but also make the cover actually hard to remove, and not as efficient at keeping the heat in the spa. Time for a better type of Swim Spa Cover
Stinky Swim Spa Cover?!?
• Broken or harmed. Broken foam cores, ripped or used spots, torn joints. A Swim Spa Cover that loses it’s arched roofing line, to keep water draining off correctly, will eventually start to puddle water, which is most likely time to buy a new Swim Spa Cover! A Swim Spa Cover with threadbare areas in the vinyl is likewise problem, and although you can stave off the inevitable with a duct tape repair, the water will win, eventually.
• Not Removed Regularly. Eliminate your Swim Spa Cover weekly for 2 hours of airing out. A better Swim Spa Cover can withstand longer durations, but it’s a great habit to remove the cover and let it get some air on a weekly basis. If you can easily open the zipper to enable moisture to escape do so, but don’t remove vulnerable foam panels unless absolutely essential.
Actually, this is just hogwash The problem is the foam itself. It would be great if it were put into use in a totally dry setting. Unfortunately, swim spas by their very nature are filled with warm water. Warm water creates steam and steam rises up and gets into the cracks and crevises in the foam until it gets so heavy you can’t lift it anymore. The only way to avoid it is to never put it on the swim spa.
• Poorly Made. It’s simple to make a Swim Spa Cover with tape and staples, however it will not stop moisture extremely well. Even the best foam filled Lightweight Swim Spa Covers with vacuum-wrapped and heat bonded joint are not going to keep the extreme wetness from your spa from reaching the foam core. The only real solution is a Swim Spa Cover uses air to insulate rather than foam.
• Bad Spa Water. If the spa water is not maintained frequently with sanitizer and filtering, or is not surprised often enough, germs and algae can take advantage of a congenial environment to flourish. Low pH, high chlorine or high ozone levels can also degrade the underside of your Swim Spa Cover cover. Because the cover is so close to the spa, it soaks up the chemistry of the spa. Clean, clear and hygienic water is the best environment to prevent foul-smelling spa covers. (Sorry but this is simply BS) The truth is the areas in the foam are almost laboratory conditions for growing mold and mildew. Your spa chemistry is not going to stop that.
• Not Cleaned/ Conditioned. For outside Lightweight Swim Spa Covers, unless your back deck is covered or your spa is in a gazebo, you have sun, rain, pollen, dust, contamination, and animals to contend with. If you have a partial roofing system, that can be even worse than no roofing system at all, if an overhanging eave drains water onto the Swim Spa Cover Clean and condition a spa cover 2-4 times each year, so that it constantly looks great, and is secured from the elements. Again, this truly isn’t going to stop the mold and mildew from growing inside a foam cover But it will assist your spa dealer pay their expenses. If this were actually true a Swim Spa Cover inside would never get smelly and that just isn’t true.
Fix Your Swim Spa Cover!
• Remove to Safe Location: This initial step may appear obvious, however you need a great location to permit the cover to sit undisturbed from animals, wild animals, and winds. It needs to be a bright area if possible, or a dry indoor place with low humidity can also be used.
• Deodorize & Disinfect: You may not have to do both, it’s finest to be as mild as possible. Do not use home cleaning products on your Swim Spa Cover, strange chemicals can wind up in your spa water. Carefully tidy all outside surfaces with spa cover cleaner, and enable the panels to dry.
• Remove the Panels: Again, this need to be prevented if possible, because the panels could become harmed throughout removal or cleansing. However if you determine that there is something slimy within, you can generally unzip and get rid of the panel for a cleansing inside and out.
How frequently does your spa dealership expect you to do all this? If your swim spa is safeguarded from a lot of sun and rain, two times per year. If it’s exposed it ought to be 3-4 times per year. Let that sink in a minute. Getting the foam panels in and out of the cover (something that was never designed to be done after it was initially constructed) will just cause it to rip apart or breakdown even faster.
Much better Choice
The most convenient cure for a foul-smelling Swim Spa Cover is to just buy a different sort of Swim Spa Cover A smelly swim spa cover simply implies that your cover is taking on wetness, and things are beginning to grow! Lightweight Swim Spa Covers from SpaCap.com that does not use foam but has sealed air chambers instead will prevent giving the mold and mildew a place to grow in the first place.