Why Your Swim Spa Cover Stinks!

Hey, no offense, however your swim spa cover smells bad. Possibly you’ve gotten used to it?
Don’t worry, it happens to all spa owners at some time or another; water is among nature’s most erosive compounds. Moisture permeates in and ends up being trapped between the outer vinyl shell and the cling wrap foam cores. The warm, moist environment is best for mold and mildew and other forms of stinky stuff.
If wetness has actually penetrated even more into the cling wrap foam core, the cover ends up being waterlogged, which can quickly grow all sorts of dark and foul-smelling slime, however likewise make the cover actually difficult to remove, and not as reliable at keeping the heat in the spa. Time for a much better type of swim spa cover.

Smelly Swim Spa Cover?!?
• Broken or harmed. Cracked foam cores, ripped or worn spots, torn joints. A spa cover that loses it’s arched roofing line, to keep water draining off properly, will eventually begin to puddle water, which is probably time to purchase a new swim spa cover! A spa cover with threadbare spots in the vinyl is likewise bad news, and although you can fend off the inescapable with a duct tape repair, the water will win, eventually.
• Not Removed Regularly. Eliminate your spa cover weekly for 2 hours of airing out. A better cover can hold up against longer durations, however it’s a great practice to get rid of the cover and let it get some air on a weekly basis. If you can quickly open the zipper to allow moisture to get away do so, however don’t remove fragile foam panels unless absolutely required.
• Poorly Made. It’s simple to make a swim spa cover with tape and staples, however it will not stop moisture effectively. Even the very best foam filled covers with vacuum-wrapped and heat bonded joint are not going to keep the extreme moisture from your spa from reaching the foam core. The only genuine service is a swim spa cover utilizes air to insulate rather than foam.
• Bad Spa Water. If the spa water is not maintained routinely with sanitizer and filtering, or is not stunned frequently enough, bacteria and algae can take advantage of a congenial environment to thrive. Low pH, high chlorine or high ozone levels can likewise degrade the underside of your spa cover. Because the cover is so near the spa, it soaks up the chemistry of the spa. Tidy, clear and hygienic water is the best environment to prevent foul-smelling spa covers. (Sorry but this is just BS) The fact is the spaces in the foam are almost laboratory conditions for growing mold and mildew. Your spa chemistry is not going to stop that.
• Not Cleaned/ Conditioned. For outside spa covers, unless your back deck is covered or your spa is in a gazebo, you have sun, rain, pollen, dust, pollution, and animals to contend with. If you have a partial roofing, that can be even worse than no roofing system at all, if an overhanging eave drains water onto the spa cover. Tidy and condition a spa cover 2-4 times annually, so that it always looks fantastic, and is protected from the elements. Again, this actually isn’t really going to stop the mold and mildew from growing inside a foam cover. But it will assist your spa dealer pay their costs.

Your Choices

Repair Your Hot Tub Cover!
• Remove to Safe Location: This first step may seem apparent, however you need an excellent place to permit the cover to sit undisturbed from pets, wild animals, and winds. It should be a warm area if possible, or a dry indoor place with low humidity can also be utilized.
• Deodorize & Disinfect: You might not need to do both, it’s best to be as mild as possible. Don’t use family cleaning products on your spa cover, weird chemicals can wind up in your spa water. Gently clean all exterior surface areas with spa cover cleaner, and allow the panels to dry.
• Remove the Panels: Again, this ought to be prevented if possible, due to the fact that the panels might become damaged during removal or cleansing. But if you determine that there is something slimy inside, you can normally unzip and eliminate the panel for a cleaning inside and out.

How typically does your spa dealership expect you to do all this? If your swim spa is safeguarded from a lot of sun and rain, twice annually. If it’s out in the open it must be 3-4 times each year. Let that sink in a minute.

Better Choice
The simplest remedy for a stinky swim spa cover is to simply buy a different sort of swim spa cover A foul-smelling swim spa cover just implies that your cover is handling wetness, and things are starting to grow! Swim Spa Covers from SpaCap.com that does not use foam but has sealed air chambers instead will avoid giving the mold and mildew a place to grow in the first place.

Leave a Reply

Your email address will not be published. Required fields are marked *