Why Your Hot Tub Cover Stinks!

Hey, no offense, however your hot tub cover smells bad. Perhaps you’ve gotten used to it?
Don’t worry, it occurs to all spa owners at some time or another; water is one of nature’s most erosive compounds. Moisture permeates in and becomes trapped between the outer vinyl shell and the plastic wrapped foam cores. The warm, damp environment is best for mold and mildew and other kinds of stinky things.
If moisture has permeated further into the cling wrap foam core, the cover ends up being waterlogged, which can quickly grow all sorts of dark and foul-smelling slime, but also make the cover actually difficult to get rid of, and not as effective at keeping the heat in the spa. Time for a better type of hot tub cover

Smelly Hot Tub Cover?!?
• Broken or damaged. Broken foam cores, ripped or used areas, torn joints. A hot tub cover that loses it’s arched roof line, to keep water draining pipes off correctly, will ultimately start to puddle water, which is most likely time to purchase a brand-new hot tub cover! A spa cover with threadbare areas in the vinyl is also bad news, and although you can stave off the unavoidable with a duct tape repair, the water will win, ultimately.
• Not Removed Regularly. Eliminate your hot tub cover weekly for 2 hours of airing out. A better cover can endure longer periods, however it’s a great routine to eliminate the cover and let it get some air on a weekly basis. If you can easily open the zipper to permit moisture to escape do so, but do not eliminate vulnerable foam panels unless absolutely essential.

Actually, this is just hogwash. The problem is the foam itself. It would be great if it were put into use in a totally dry setting. Unfortunately, hot tubs by their very nature are filled with warm water. Warm water creates steam and steam rises up and gets into the cracks and crevises in the foam until it gets so heavy you can’t lift it anymore. The only way to avoid it is to never put it on the hot tub.
• Poorly Made. It’s easy to make a hot tub cover with tape and staples, but it won’t stop moisture very well. Even the very best foam filled Hot Tub Covers with vacuum-wrapped and heat welded seam are not going to keep the extreme wetness from your spa from reaching the foam core. The only genuine option is a hot tub cover utilizes air to insulate rather than foam.
• Bad Spa Water. If the spa water is not maintained routinely with sanitizer and filtering, or is not stunned frequently enough, germs and algae can make the most of a hospitable environment to thrive. Low pH, high chlorine or high ozone levels can likewise weaken the underside of your hot tub cover cover. Due to the fact that the cover is so close to the spa, it soaks up the chemistry of the spa. Tidy, clear and hygienic water is the best environment to prevent smelly spa covers. (Sorry but this is just BS) The fact is the spaces in the foam are almost laboratory conditions for growing mold and mildew. Your spa chemistry is not going to stop that.
• Not Cleaned/ Conditioned. For outdoor Hot Tub Covers, unless your back deck is covered or your spa remains in a gazebo, you have sun, rain, pollen, dust, pollution, and animals to contend with. If you have a partial roofing, that can be worse than no roofing system at all, if an overhanging eave drains water onto the spa cover. Clean and condition a spa cover 2-4 times per year, so that it always looks excellent, and is safeguarded from the aspects. Again, this actually isn’t really going to stop the mold and mildew from growing inside a foam cover. However it will assist your spa dealership pay their bills.

Your Choices

Fix Your Hot Tub Cover!
• Remove to Safe Location: This primary step might seem obvious, however you require a good place to enable the cover to sit undisturbed from animals, wild animals, and winds. It must be a sunny location if possible, or a dry indoor area with low humidity can also be used.
• Deodorize & Disinfect: You might not have to do both, it’s best to be as mild as possible. Do not use home cleaning products on your spa cover, unusual chemicals can wind up in your spa water. Gently clean all exterior surfaces with spa cover cleaner, and permit the panels to dry.
• Remove the Panels: Again, this must be avoided if possible, since the panels could end up being harmed during removal or cleansing. However if you figure out that there is something slimy inside, you can generally unzip and eliminate the panel for a cleaning inside and out.

How often does your spa dealership anticipate you to do all this? If your hot tub is secured from many sun and rain, twice per year. If it’s visible it needs to be 3-4 times each year. Let that sink in a minute.

Better Choice
The most convenient treatment for a smelly hot tub cover is to just buy a various kind of hot tub cover A smelly swim spa cover simply implies that your cover is handling moisture, and things are beginning to grow! Hot Tub Covers from SpaCap.com that doesn’t use foam however has actually sealed air chambers instead will prevent offering the mold and mildew a place to grow in the first place.

Leave a Reply

Your email address will not be published. Required fields are marked *